MYK LATICRETE STONE CARE PRESERVA PLUS

About MYK LATICRETE STONE CARE PRESERVA PLUS

•  91 000 74051 Preserva is a nano-technology impregnating sealer + enhancer designed for natural stone, tiles and textured/porous surfaces. 

• Its not a grout its a surface treatment that penetrates into the stone/tile, rather than sitting on top, to provide long-term protection and aesthetic enhancement. Its typically available in liquid form (pack sizes such as 1 L, 5 L, 20 L) to be applied via cloth, brush, roller etc.

When applied correctly, Preserva offers:

• Water & oil / stain resistance  treated surfaces repel water, oil, staining agents, helping protect stone/tile from spills and dirt. 

• Enhanced appearance (natural colour enhancement / wet-look)  it can revive dull-looking stone or tile, enriching its colour and making it look more vibrant or wet.  Harder, less slippery surface  after treatment, texture tends to become more resistant and safer (less slippery), especially helpful for outdoor or wet-area use. 

• Weather / UV resistance & durability  suitable for both indoor and outdoor use; helps protect against environmental wear, moisture, and general wear & tear. 

• Breathable & non-film forming  because it impregnates rather than coats, the surface remains breathable (vapour can escape), avoiding issues like peeling or surface film. 

Preserva is especially useful when:

• You have natural or textured stone (granite, limestone, marble, slate, etc.) or porous tiles / textured surfaces  places where water/stain absorption is a risk.

• You want to improve appearance  e.g. giving a wet look to dull stone or making patterns/colours richer.

• Surfaces are exterior, exposed to weather/UV, or in wet zones (balcony, patio, bathroom, kitchen, outdoor pavements) and need protection against water, dust, stains, weathering.

• You want low-maintenance, long-lasting protection  especially if you prefer surfaces that are easier to clean and more resistant to staining over time.

• You are finishing an installation of stone/tile and want to seal and protect on completion (or periodically maintain and refresh protection).

• It is not a substitute for grout or epoxy grouting  it doesnt fill joints or seal gaps between tiles/stones. Use grout or epoxy for that.

• It will not prevent acid-etching or mechanical wear on the surface  if you scrub hard, use harsh acids or abrasive cleaners, surface finish can still degrade over time. 

• For extremely high-traffic or heavy industrial floors (exposed to chemicals/heavy wear), it might need re-application over time for continued performance sealers degrade under heavy use/harsh conditions. On very smooth or non-porous tiles/stones, the benefit will be minimal (since there isnt much porosity to penetrate).