MYK TILE ADHESIVE POLYMER MODIFIED

About MYK TILE ADHESIVE POLYMER MODIFIED

91 000 74051 LATICRETE 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substratessuch as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants.

Key Features & Benefits:

• Easy to Use: Just add water for mixing no multi-part systems or complex preparation required.

• Extended Open Time: Provides a long pot life (up to 3 hours) which gives installers more time to adjust tiles and ensures proper setting.

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly.

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards.

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications.

• Substrate Compatibility: Bonds to a wide range of surfaces concrete, brick masonry, plaster, mortar beds, existing tiles, etc.

• Very Economical Coverage: Around 5560 sq ft per 20 kg bag (with 3 mm bed thickness, using a 6 6 mm notched trowel).

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive.

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

Polymer Modified for Enhanced Bonding

Formulated with polymer additives, this adhesive delivers exceptional bond strength and flexibility, making it perfect for demanding tile installations on both floors and walls. Its reliable composition guarantees strong adhesion even in moisture-prone areas, providing a durable solution for both residential and commercial projects.


Easy Application and Mixing

With a simple mixing ratio of 3 parts powder to 1 part water, MYK Tile Adhesive is easy to prepare and apply, minimizing downtime for installers. The pot life of about 4 hours at 27C allows ample working time, while the open time of over 20 minutes offers flexibility during tile placement.


Reliable Performance and Coverage

Delivering a compressive strength greater than 10 MPa after 28 days and a tensile adhesion strength exceeding 1 MPa, this adhesive ensures stability and safety in tile installations. One bag covers approximately 3.5-4 kg/m2 at a 3mm thickness, offering good value for large and small projects.