VEPOXY SP GOLD - 2K GROUT

Price 950.0 INR/ Kilograms

Get a Price/Quote

MOQ : 1 Kilograms

91 000 74051 VEPOXY SP GOLD is a two-component (resin + hardener + filler-powder) epoxy tile grout for grouting tile joints i.e. filling the gaps between tiles, not for sticking tiles to floor/wall.
Its meant for ceramic tiles, vitrified tiles, natural stone (marble/granite), glass-mosaic, and other tile/stone surfaces.
Target use: areas where hygiene, water-resistance, stain-resistance and durability matter kitchens, bathrooms, swimming pools, hospitals, restaurants, heavy-traffic floors and wet/water-exposed surfaces.

Technical Specs & Properties

Property / Feature	Specification / Benefit
Suitable joint width	06 mm grout joints
Water absorption	< 0.5%
Compressive strength	> 50 MPa
Shrinkage / cracking / powdering	Non-shrinkage, non-cracking, non-powdering finish
Chemical / acid / alkali resistance
Water resistance & stain resistance	Yes good for wet / stain-prone areas
Antifungal and antibacterial	Yes helps hygiene & prevents mould / fungus in damp areas
Pot life (working time)	~ 4045 minutes after mixing
Foot traffic allowed after	~ 24 hours
Available colours	Common: White, Black, Ivory. Custom colours possible on demand.
Packaging	2 kg and 5 kg pails / buckets.
Shelf life (sealed)	24 months if stored in a cool, dry place.

Advantages & When You Should Use It

Use VEPOXY SP GOLD when you need:

Durable grout joints for high-traffic floors, commercial kitchens, pool decks, bathrooms, etc. Because its epoxy-based its more durable than regular cement-based grout.
Waterproof, stain-proof & hygienic finish good for kitchens, bathrooms, hospitals, restaurants, swimming pools or any wet / hygiene-sensitive area.
Strong chemical, acid, alkali resistance useful where cleaning chemicals, detergents, grease, or moisture are frequent.
Minimal maintenance & long life thanks to non-shrinking, non-cracking, anti-fungal, stain-resistant and water-resistant properties.
Vertical or horizontal surfaces clings well to vertical surfaces too, so usable for wall tiles as well as floors.

How to Use Important Considerations

Ensure tiles & joints are clean, dry and free of dust/debris before grouting.
Mix properly: combine resin (Part A), hardener (Part B) and filler (Part C) thoroughly. Use a low-speed stirrer to avoid overheating (which reduces pot life).
Work the mixed grout within 4045 min (pot-life), finish grouting, and clean off excess grout from tile surfaces before it starts to set.
Avoid leaving excess grout on tile surface as it may cure to hard film clean off promptly with sponge / float.
Allow full curing / drying before exposing to heavy traffic or water generally 24 hrs for foot-traffic safe, but full chemical / water-resistance likely needs curing as per instructions.