VBOND WATERPROOF PRIMER EXTERIOR
VBOND WATERPROOF PRIMER EXTERIOR
VBOND WATERPROOF PRIMER EXTERIOR
VBOND WATERPROOF PRIMER EXTERIOR
VBOND WATERPROOF PRIMER EXTERIOR
VBOND WATERPROOF PRIMER EXTERIOR

VBOND WATERPROOF PRIMER EXTERIOR

MOQ : 1 Liter

VBOND WATERPROOF PRIMER EXTERIOR Specification

  • Physical Form
  • Liquid
  • CAS No
  • Not Applicable (Mixture)
  • Molecular Formula
  • Not Applicable (Mixture)
  • HS Code
  • 32091020
  • Water Content
  • Water-based
  • Feature
  • Superior adhesion, Waterproofing, UV resistant, Alkaline resistant, Quick drying
  • Boiling point
  • Above 95C
  • Appearance
  • Milky White Liquid
  • Poisonous
  • NO
  • Purity
  • Highly pure acrylic blend
  • Smell
  • Mild acrylic odor
  • Other Names
  • Exterior Primer, Waterproof Primer
  • Grade
  • Exterior
  • Color
  • White
  • Ph Level
  • 8-9
  • Usage
  • Applied as a primer coating for exterior walls prior to painting
  • Application
  • Exterior surfaces such as cement plaster, concrete, brickwork, asbestos
  • Type
  • Acrylic Primer
  • Chemical Name
  • Acrylic polymer emulsion (proprietary blend)
  • Molecular Weight
  • Not Applicable (Mixture)
  • Packaging Size
  • 1 Litre, 4 Litre, 10 Litre, 20 Litre
  • VOC Content
  • Low
  • Thinner/Cleaning
  • Water
  • Storage Conditions
  • Store in cool, dry place below 30C and away from direct sunlight
  • Non-Volatile Content
  • Approximately 40% by weight
  • Coverage
  • 100-120 sq. ft/litre/coat depending on surface
  • Binder Type
  • Acrylic Polymer
  • Shelf Life
  • 24 months in original sealed container
  • Recoating Time
  • 2-3 hours
  • Drying Time
  • Surface dry in 30-45 minutes at 25C
 

VBOND WATERPROOF PRIMER EXTERIOR Trade Information

  • Minimum Order Quantity
  • 1 Liter
  • Delivery Time
  • 1 Days
 

About VBOND WATERPROOF PRIMER EXTERIOR

91 000 74051 VBOND Ready Plaster is a blend of Portland cement, finely graded sand & water soluble high-quality polymer additives in the Specified proportion. This mixture is ready to use by mixing with water at the site & can be applied on bricks, blocks, and concrete surfaces

Superior Waterproofing & Protection

Formulated with a highly pure acrylic blend, VBOND WATERPROOF PRIMER EXTERIOR provides exterior walls with superior protection against water ingress, UV rays, and alkaline substances. Its robust adhesion ensures that your final paint coat adheres strongly and lasts longer, effectively protecting underlying surfaces even in challenging outdoor conditions.


Directions for Use and Coverage

For optimal results, apply the primer to clean, dust-free surfaces. The product dries to the touch within 30-45 minutes at 25C, and recoating is recommended after 2-3 hours. One litre covers 100-120 sq. ft per coat, though coverage may vary based on the porosity and texture of the substrate.


Long Shelf Life and Safe Storage

VBOND WATERPROOF PRIMER EXTERIOR offers a shelf life of 24 months when stored in its original, sealed container. Keep the product in a cool, dry area below 30C and away from direct sunlight to maintain its efficacy and stability.

FAQ's of VBOND WATERPROOF PRIMER EXTERIOR:


Q: How should I apply VBOND WATERPROOF PRIMER EXTERIOR for best results?

A: Apply the primer onto a clean and dry exterior surface using a brush, roller, or spray. Ensure the area is free from dust, grease, and flaky residues. Allow the primer to dry for 30-45 minutes at 25C before applying any additional coats or topcoats.

Q: What surfaces can VBOND WATERPROOF PRIMER EXTERIOR be used on?

A: This primer is suitable for external surfaces such as cement plaster, concrete, brickwork, and asbestos. It acts as a preparatory coat to improve adhesion and durability of your final paint layer.

Q: When is it safe to recoat after applying the primer?

A: You can recoat with either another primer layer or your chosen paint after a drying period of 2-3 hours under standard conditions (25C). Make sure the surface is fully dry to the touch before recoating.

Q: Where should the product be stored to maintain its quality?

A: Store VBOND WATERPROOF PRIMER EXTERIOR in a cool, dry place below 30C and shield it from direct sunlight. Always keep the container tightly sealed when not in use to preserve its shelf life and effectiveness.

Q: What cleaning agents should be used for equipment after application?

A: Since the product is water-based, simply use clean water to wash brushes, rollers, and any other application tools immediately after use.

Q: What benefits does VBOND WATERPROOF PRIMER EXTERIOR offer for exterior wall painting?

A: The primer enhances adhesion, provides a waterproof layer, resists UV and alkalinity, and supports long-lasting, vibrant paint finishes. Its quick-drying nature and low VOC levels make it both efficient and safe for users.

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in V-Bond Products Category

V-BOND 3325 PLATINIUM

V-BOND 3325 PLATINIUM

Price 668.0 INR

Minimum Order Quantity : 1 Kilograms

Usage : Applied to mould surfaces for easy demolding of parts

Physical Form : Liquid

Grade : Industrial Grade

Feature : High performance, low viscosity, high thermal stability

V-Bond 1307 Gold Tile Adhesive

V-Bond 1307 Gold Tile Adhesive

Price 520.0 INR / Piece

Minimum Order Quantity : 1 Piece

Usage : construction & rennovation projects

Physical Form : Other

Grade : gold grade

Feature : high bonding strength,waterresistsnt/suitable for heavy tiles

VBOND WALL CARE XPERT FINE PUTTY

VBOND WALL CARE XPERT FINE PUTTY

Price 920.0 INR

Minimum Order Quantity : 1 Bag

Usage : Ready to use with water, applied to plastered walls to give smooth finish prior to painting

Physical Form : Powder

Grade : Premium grade

Feature : Smooth finish, excellent adhesion, alkali resistant, water resistant

VBOND BLOCK JOINT MORTAR

VBOND BLOCK JOINT MORTAR

Price 580.0 INR / Bag

Minimum Order Quantity : 1 Bag

Usage : Interior & exterior tile grouting in bathrooms, kitchens, floors, fa ades

Physical Form : Powder

Grade : Construction / Industrial Grade

Feature : High bond strength, water resistant, crack resistant, durable joints, antishrink



Back to top