MYK Laticrete Maxiseal Tile Adhesive

About MYK Laticrete Maxiseal Tile Adhesive

•  91 000 74051 Maxiseal is a nano-technology, impregnating sealer not a grout or grout-admixture, but a protective sealant you apply to tile, stone or grout surfaces. 

• Its designed to penetrate into porous and semi-porous surfaces (tiles, natural stone, cement grout, masonry, etc.) and create an invisible protective barrier. 

• Because its a sealer (not a paint or top-coat), it doesn't significantly change the look, color or texture of the surface it preserves the natural appearance.

When used correctly, Maxiseal offers:

• Water-repellency (hydrophobic) + oil / stain resistance (oleophobic) makes surfaces resistant to water, oil, alkalis and common staining substances (coffee, juice, dirt, dust). 

• Enhanced surface hardness & reduced slipperiness treated surfaces are reportedly harder and less slippery, which helps especially on floors or outdoor tile/stone surfaces. 

• Protection against UV, weathering, freeze-thaw cycles & efflorescence good for exterior applications or areas exposed to moisture/climate fluctuation. 

• Easier maintenance & cleaning since the surface resists staining and moisture, cleaning becomes simpler and routine maintenance is easier. 

Maxiseal is best used when:

• You have porous or natural stone tiles, cement grout, masonry or concrete surfaces e.g. marble, granite, limestone, terracotta, sandstone, slate, cement-grout joints, etc. 

• You want to protect surfaces from moisture/ oil/ stains bathrooms, kitchens, wet zones, patios, balconies, exterior walls/facades, natural-stone flooring, etc.

• You prefer maintenance ease and long-term durability particularly in homes or commercial spaces where surfaces are exposed to dirt, spills, foot-traffic, or weather.

• Youre preparing surfaces before grouting many sealer use-cases involve pre-grouting application to protect tile/stone from grout stain absorption. 

• It does not replace grout, epoxy, or waterproofing it only seals and protects porous surfaces/grout/tile from stains and absorption.

• Surface must be clean, dry and free from dust, oil, grease or curing compounds before applying otherwise performance will be compromised. 

• If not applied properly (wrong surface, insufficient absorption, excess residue not wiped off), it may not provide effective protection.