Ultratech Tile Adhesive

About Ultratech Tile Adhesive

•  91 000 74051 According to a non-official listing, UltraTech describes TileFixo Ultima Plus as a premium, polymer-enriched adhesive for large-format vitrified, porcelain, and natural stone tiles. It appears to belong to the broader UltraTech TileFixo range meant for tile and marble adhesion. TileFixo adhesives, it likely uses a polymer-modified cementitious formula, which gives stronger adhesion compared to plain cement adhesives. 

• Intended for large-format vitrified/porcelain or natural stone tiles  suggesting its designed for heavy, large-size tiles rather than small ceramic tiles. 

• On official UltraTech website (TileFixo product-range page), Ultima Plus is currently not listed among the standard variants. 

• There is no publicly available technical data sheet (TDS) specifying coverage, water-to-powder ratio, open-time, adhesion strength etc. so performance claims cannot be independently verified.

• Confirm with the retailer or seller whether this packaging is genuine and if they have a TDS or batch-certification especially since its not listed on official site.

• Use for large-format vitrified/porcelain or natural stone tiles  as that seems to be its intended purpose.

• Ensure substrate preparation as for any TileFixo adhesive: clean, cement-based surface, free from dust/oil/laitance.

• Because technical specs are unclear, do a small trial patch (if possible) first check bonding strength after 4872 hrs, before doing full-scale tiling.