Send Inquiry

Request To Call Back

ULTRATECH ROYAL NT PLUS TILE ADHESIVE

Get a Price/Quote

MOQ : 1 Kilograms

ULTRATECH ROYAL NT PLUS TILE ADHESIVE Specification

Adhesive Type
Polymer modified thinset adhesive

Storage Temperature
Store in cool and dry place below 30C

Form
Powder

Material
Polymer-modified cement based adhesive

Surface Of Application
Cementitious substrate, concrete, plastered surfaces, brick walls

Glue thickness
3-10 mm

Shelf Life
12 months, if unopened and stored properly

Packaging Size
20 kg & 30 kg

Tensile Strength
>0.5 N/mm2 (after water immersion/heat ageing/freeze-thaw cycle)

Holding Power
High bond strength

Types Of Chemical
Cement based polymer modified

Features
High strength, easy application, water resistant, non-toxic, slip resistance, smooth finish

Other Names
Cementitious Tile Adhesive

Usage
For fixing vitrified tiles, ceramic tiles, stones on wall and floor (internal applications)

Grade
Premium grade

Purity
High Purity

Application
Tile and stone fixing adhesive for internal wall and floor surfaces

Color
Grey

Physical State
Powder

Open Time
20-30 minutes

Standards Compliance
Meets IS 15477: 2019 & EN 12004 C1T standards

Mixing Ratio
Approximately 3.25 - 3.75 litres of water per 20 kg bag

Pot Life
2 to 3 hours after mixing

Walkability
After 24 hours

Compressive Strength
>10 N/mm2

Toxicity
Non-Toxic

Coverage
3 - 4.5 kg/m2 depending on trowel size and substrate condition

ULTRATECH ROYAL NT PLUS TILE ADHESIVE Trade Information

Minimum Order Quantity
1 Kilograms

Delivery Time
1 Days

About ULTRATECH ROYAL NT PLUS TILE ADHESIVE

91 000 74051 TileFixo Royal NT Plus is a polymer-modified cementitious tile adhesive made by UltraTech, designed for fixing large format tiles and natural stones (like marbles, granites, large-size tiles) on floors and walls.
Its suitable for both interior and exterior applications, and works on cement-based substrates such as plaster, concrete, screed, cement boards, bricks, etc.

Where & How Its Used

Ideal for large tiles / slabs / natural stones on walls and floors, for both indoor and outdoor.
Also suitable for wet or damp environments, including submerged areas like swimming pools, water tanks, fountains, terraces, balconies thanks to its water-resistant properties.
Works well for tile-on-tile or new tile installations, over cement surfaces.

Key Properties & Benefits

High bond strength & excellent adhesion ensures tiles/natural stone stay firmly fixed to substrate.
Polymer-modified and self-curing no need for additional curing agents; single component and easy to use.
Non-sag / Non-slip & high slip-resistance prevents sliding of heavy tiles/stones, especially on walls or vertical surfaces.
Extended open time gives enough time to adjust and position large tiles properly before adhesive sets.
Versatile substrate compatibility works on plaster, concrete, screed, cement boards, brick surfaces, etc.
Suitable for demanding & heavy-duty use tile-on-tile, external cladding, natural stone flooring, wall cladding, wet areas etc.

Technical & Application Guidelines

Water-to-powder mixing ratio: ~ 2427% potable water by weight.
Mix with a mechanical stirrer for 23 minutes for a lump-free mix; allow to stand ~2 minutes, then remix before application.
Apply using appropriate notched trowel depending on tile size; ensure proper bed thickness.
Clean surface thoroughly before application free of dust, oils, laitance etc., for effective bonding.

Premium Performance for Internal Applications

ULTRATECH ROYAL NT PLUS TILE ADHESIVE delivers exceptional bond strength and durability, making it ideal for installing vitrified tiles, ceramic tiles, and natural stones on internal floor and wall surfaces. Its advanced polymer-modified formula enhances adhesion and slip resistance, ensuring tiles remain securely fixed even in demanding environments.

Simple Mixing and Application Process

Preparation is quick and straightforward-simply mix 3.25 to 3.75 litres of clean water per 20 kg bag of adhesive until a uniform, lump-free paste is formed. It can be applied using a notched trowel at a thickness of 3-10 mm, making it suitable for a variety of tile and stone sizes. The adhesive is easy to spread, delivering a smooth and consistent finish with minimal effort.

Reliable and Safe for Indoor Use

Tested to IS 15477:2019 and EN 12004 C1T standards, this adhesive is non-toxic and free from hazardous substances, ensuring safety for both applicators and building occupants. Its excellent water resistance and slip resistance contribute to longer-lasting tile installations, while its non-toxic nature makes it a smart choice for internal spaces in homes, offices, and commercial buildings.

FAQ's of ULTRATECH ROYAL NT PLUS TILE ADHESIVE:

Q: How should I mix ULTRATECH ROYAL NT PLUS TILE ADHESIVE for best results?

A: For optimal performance, gradually add 3.25 to 3.75 litres of clean water to a 20 kg bag of powder and mix thoroughly with a mechanical stirrer until a smooth, lump-free paste is achieved. Let the mixture stand for a few minutes before use.

Q: What surfaces and tile types can this adhesive be used on?

A: ULTRATECH ROYAL NT PLUS TILE ADHESIVE is suitable for fixing vitrified tiles, ceramic tiles, and stones on internal wall and floor surfaces, including cementitious substrates, concrete, plastered surfaces, and brick walls.

Q: When is it safe to walk on the tiled surface after using this adhesive?

A: You can walk on the newly tiled surface 24 hours after installation, giving the adhesive ample time to cure and achieve strong bond strength.

Q: Where should this tile adhesive be stored before use?

A: Store the unopened bags in a cool, dry place below 30C and away from moisture. This will help maintain its quality and effectiveness for up to 12 months from the date of manufacture.

Q: What are the main benefits of using this adhesive for tile installation?

A: The adhesive offers high bond strength, water resistance, slip resistance, and a smooth finish, making installation reliable and long-lasting. Its non-toxic formulation ensures safety for interior applications.

Q: What is the coverage area per bag of adhesive?

A: Coverage depends on the trowel size and substrate condition, generally ranging from 3 to 4.5 kg per square meter. A 20 kg bag can cover approximately 4.5 to 6.5 square meters.

Tell us about your requirement