TE-105 NCL Tilostik Grey White Tile Adhesive

About TE-105 NCL Tilostik Grey White Tile Adhesive

•  91 000 74051 NCL Tilostik is a cement-based, polymer-modified thin-bed tile adhesive from NCL Buildtek. 

• Its distributed as a dry-powder adhesive. On-site you simply add water (single-pack system) and mix no need for custom cement-sand mixes. 

• It is meant for fixing tiles (ceramic, vitrified, certain stones) and is suitable for both wall and floor applications on leveled, prepared substrates (concrete, screed, cement plaster, etc.). 

Technical Specs & Suitable Use (as per NCLs data)

• Color / appearance: Grey (or white version depending on supply) dry powder.

• Mixing with water  roughly 2530% water by weight is recommended for proper consistency. 

• Pot life / working time: ~ 180 minutes after mixing (gives you sufficient time for application) 

• Bed thickness (adhesive layer): minimum ~ 3 mm, can vary depending on tile size and job requirements. 

• Open time (time you have to adjust tiles after placing adhesive): > 20 minutes (at ~25 C) gives flexibility during installation. 

• Coverage (approx): For a 3 mm bed thickness stated as > 3 sqft per kg (so a 20 kg bag covers significantly, though actual depends on trowel size, tile size, substrate condition). Time to traffic (after which you can walk / grout / use floor): ~ 24 hours after laying. 

Advantages / What Its Good For

• Because its polymer-modified and premixed, it gives a strong, reliable bond  better and more consistent than traditional cement-sand mortar mixing onsite. 

• It helps avoid hollowness (voids or air-gaps under tiles) even under stone or compact tiles, giving a solid, stable finish for floors.

• Versatile usable for interior and exterior applications, on walls and floors, on various cementitious substrates (plaster, screed, concrete) good for residential and commercial / renovation jobs. 

• Because of consistent factory-prepared mix, it reduces labor, wastage, and variation compared to manual mortar mixes convenient for faster tile installation. 

What to Keep in Mind / When to Use Carefully

• The substrate (floor/wall surface) must be clean, level, stable, free of dust/oil/loose particles for good adhesion (as with any tile adhesive).

• While advertised for tiles and stones, performance will depend on tile/stone type make sure tile porosity / size / weight is within what Tilostik is suitable for (moderate to normal-size tiles, not extremely heavy slabs).

• Use proper trowel notch size (as recommended by installer) and apply adhesive evenly for full bed coverage to avoid weak bonding or hollow spots.

High Performance Tile Adhesive

TE-105 NCL Tilostik Grey White Tile Adhesive is engineered with advanced cement-based polymer technology, ensuring superior holding power for all types of tiles, mosaics, and stones. Its unique blend guarantees high bond strength, water resistance, and excellent workability on floors and walls alike.


Efficient and Consistent Application

With a pot life of 3-4 hours and an open working time of 20-30 minutes, this adhesive allows flexible installation. Its sag-resistant formulation ensures tiles stay firmly in place, while the dry mix and premium purity make it easy to use, reduce wastage, and promote clean, uniform coverage.


Safe, Reliable, and Durable Solution

TE-105 NCL Tilostik is low in VOCs, making it environmentally friendly and safe for indoor use. Its robust formulation guarantees a hard, resilient bond that fully cures within 14 days. Proper storage below 30C extends shelf life up to 12 months, ensuring lasting effectiveness for all your tiling projects.