PROTECTIVE COATINGS

About PROTECTIVE COATINGS

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.Key Features:
Highly flexible & breathableideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curingno external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350400 rpm for 34 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coatsfirst horizontally, then vertically after 46 hours at ~30 C. Typical consumption: 1.52.5 kg/m per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?Its a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yesmix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hoursusable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.52.5 kg/m per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.
Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yessolvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately 88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.

Versatile Protection for Demanding Surfaces

Our protective coatings are specially formulated with alkyd and acrylic binders to create a tough barrier against weather and chemical exposure. Suitable for use on metal, concrete, and masonry, they deliver a smooth, glossy finish while reinforcing surfaces against corrosion and physical wear.


Effortless Application and Quick Drying

Ideal for both new projects and maintenance, these coatings can be applied by brush, roller, or spray. With a single-pack formulation, they're easy to mix and use, drying to touch within 30 minutes. Full protective properties are achieved after 7 days, ensuring projects stay on schedule.


Engineered for Indian Industrial Environments

Tested for performance under Indian conditions, our coatings withstand temperatures up to 120C and are highly durable against scrubbing and environmental exposure. The high water resistance and dependable adhesion make them a trusted solution for distributors, service providers, and structural protection specialists nationwide.