NCL Tilostik TE 105 Tile adhesive

NCL Tilostik TE 105 Tile adhesive About

•  91 000 74051 NCL Tilostik is a cement-based, polymer-modified thin-bed tile adhesive from NCL Buildtek. 

• Its distributed as a dry-powder adhesive. On-site you simply add water (single-pack system) and mix no need for custom cement-sand mixes. 

• It is meant for fixing tiles (ceramic, vitrified, certain stones) and is suitable for both wall and floor applications on leveled, prepared substrates (concrete, screed, cement plaster, etc.). 

• Color / appearance: Grey (or white version depending on supply) dry powder.

• Mixing with water  roughly 2530% water by weight is recommended for proper consistency. 

• Pot life / working time: ~ 180 minutes after mixing (gives you sufficient time for application) 

• Bed thickness (adhesive layer): minimum ~ 3 mm, can vary depending on tile size and job requirements. 

• Open time (time you have to adjust tiles after placing adhesive): > 20 minutes (at ~25 C) gives flexibility during installation. 

• Coverage (approx): For a 3 mm bed thickness stated as > 3 sqft per kg (so a 20 kg bag covers significantly, though actual depends on trowel size, tile size, substrate condition). Time to traffic (after which you can walk / grout / use floor): ~ 24 hours after laying. 

• Because its polymer-modified and premixed, it gives a strong, reliable bond  better and more consistent than traditional cement-sand mortar mixing onsite. 

• It helps avoid hollowness (voids or air-gaps under tiles) even under stone or compact tiles, giving a solid, stable finish for floors.

• Versatile usable for interior and exterior applications, on walls and floors, on various cementitious substrates (plaster, screed, concrete) good for residential and commercial / renovation jobs. 

• Because of consistent factory-prepared mix, it reduces labor, wastage, and variation compared to manual mortar mixes convenient for faster tile installation. 

• The substrate (floor/wall surface) must be clean, level, stable, free of dust/oil/loose particles for good adhesion (as with any tile adhesive).

• While advertised for tiles and stones, performance will depend on tile/stone type make sure tile porosity / size / weight is within what Tilostik is suitable for (moderate to normal-size tiles, not extremely heavy slabs).

• Use proper trowel notch size (as recommended by installer) and apply adhesive evenly for full bed coverage to avoid weak bonding or hollow spots.

Reliable Adhesion for Tile Fixing

NCL Tilostik TE 105 delivers innovative adhesion technology for a variety of tile installation projects. With a polymer-modified cementitious formula, it guarantees secure attachment on challenging substrates like concrete, cement plaster, or drywall. Its advanced water-resistant properties and greater than 1.0 MPa tensile strength ensure both longevity and stability for floor or wall tiles, regardless of project scale.


Effortless Application for Professionals

Designed as a user-friendly powder, Tilostik TE 105 mixes easily and spreads smoothly, maintaining an ideal glue thickness of 3-5 mm. Its quick setting and high holding power simplify the installation process, reducing labor and saving time for professionals. This product meets the stringent demands of contemporary construction and is trusted by distributors, service providers, and traders across India.