NCL Tile Adhesive Innovative Solutions. Superior Construction

Get a Price/Quote

MOQ : 1 Bag

NCL Tile Adhesive Innovative Solutions. Superior Construction Trade Information

91 000 74051 NCL CEROSTIK TI-103 is a cement-based, polymer-modified thin-bed tile adhesive. Its a pre-mixed dry powder adhesive: you just add water on site, mix and apply no need for custom cement-sand mixes.
It conforms to standard: IS 15477:2019 (Type 1) and also meets EN 12004 classification C1T.

Technical Specs & Suitable Use

Spec / Parameter	Detail
Tile type suited	Small-format clay & ceramic tiles; works also for small-size vitrified tiles.
Substrate types	Cement plastered walls/floors, cement concrete surfaces, cement screed.
Bed thickness (adhesive thickness)	3 mm 10 mm.
Coverage	~ 0.278 m per kg (with 6 mm 6 mm notch trowel).
Packaging	Usually 20 kg bags; some sources mention also 50 kg.
Use area	Internal walls & floors; can also be used for external covered areas with small-format tiles (within limits) per manufacturer.
Other traits	Polymer-modified, self-curing, relatively low-VOC compared to some adhesives.

What Its Good For

Installing ceramic/clay tiles in interior rooms walls or floors. Good for bathrooms, kitchens, living areas (provided tiles suit).
Jobs where you want a ready-mix adhesive (less site-work compared to cement-sand mortar), to save labour and get consistent quality.
Projects where smaller tiles or standard-format tiles are used since TI-103 is meant for small/medium tiles rather than heavy or large-format stone/tiles.
Surfaces like cement plaster, concrete, screed, existing mortar beds typical for Indian residential/commercial internal tiling.

What to Consider / Where It May Not Be Ideal

Not ideal for large-format tiles, heavy stone (granite/marble), or heavy-duty outdoor tiling the product is meant for small/medium ceramic/clay tiles.
For exterior or damp/wet exposed areas (like open terraces, pool-sides, heavy moisture zones) unless conditions are controlled and tiles are small better to use heavier-duty adhesive.
As with any adhesive: substrate must be clean, level, dry, and free from dust/oil/loose plaster/paint before application. This ensures adhesion strength and durability.