NCL CEROSTIK - T1 103

About NCL CEROSTIK - T1 103

•  91 000 74051 NCL CEROSTIK TI-103 is a cement-based, polymer-modified thin-bed tile adhesive. Its a pre-mixed dry powder adhesive: you just add water on site, mix and apply no need for custom cement-sand mixes. 

• It conforms to standard: IS 15477:2019 (Type 1) and also meets EN 12004 classification C1T. 

Technical Specs & Suitable Use

Spec / Parameter	Detail
Tile type suited	Small-format clay & ceramic tiles; works also for small-size vitrified tiles.
Substrate types	Cement plastered walls/floors, cement concrete surfaces, cement screed.
Bed thickness (adhesive thickness)	3 mm 10 mm.
Coverage	~ 0.278 m per kg (with 6 mm 6 mm notch trowel).
Packaging	Usually 20 kg bags; some sources mention also 50 kg.
Use area	Internal walls & floors; can also be used for external covered areas with small-format tiles (within limits) per manufacturer.
Other traits	Polymer-modified, self-curing, relatively low-VOC compared to some adhesives.

What Its Good For

• Installing ceramic/clay tiles in interior rooms  walls or floors. Good for bathrooms, kitchens, living areas (provided tiles suit).

• Jobs where you want a ready-mix adhesive (less site-work compared to cement-sand mortar), to save labour and get consistent quality.

• Projects where smaller tiles or standard-format tiles are used since TI-103 is meant for small/medium tiles rather than heavy or large-format stone/tiles.

• Surfaces like cement plaster, concrete, screed, existing mortar beds typical for Indian residential/commercial internal tiling.

What to Consider / Where It May Not Be Ideal

• Not ideal for large-format tiles, heavy stone (granite/marble), or heavy-duty outdoor tiling  the product is meant for small/medium ceramic/clay tiles.

• For exterior or damp/wet exposed areas (like open terraces, pool-sides, heavy moisture zones) unless conditions are controlled and tiles are small better to use heavier-duty adhesive.

• As with any adhesive: substrate must be clean, level, dry, and free from dust/oil/loose plaster/paint before application. This ensures adhesion strength and durability.

Superior Tile Joint Filler for Lasting Results

NCL CEROSTIK - T1 103 provides excellent adhesion and durability in grout and tile adhesive applications. Its polymer-modified blend ensures joints remain firm and water-resistant, preventing shrinkage and maintaining a clean appearance. This powder-based product is easy to mix, spreads smoothly, and cures to a hard, white finish suitable for a wide range of tile types and surfaces.


User-Friendly Application & Storage

Application is straightforward-simply mix the specified water ratio with powder until a smooth paste forms. Its pot life of around one hour allows ample time for use, while the initial set in 4-6 hours means quick project progress. Store the product in a cool, dry place to maintain a shelf life of 12 months from packaging.


Industrial Grade Performance with Eco Benefits

Engineered for high standards, NCL CEROSTIK - T1 103 delivers strong compressive and tensile strength. Certified low VOC and non-toxic, it's safe for users and the environment, making it a preferred choice for both residential and industrial settings seeking a sustainable tile grout solution.