Send Inquiry

Request To Call Back

MYK ARMGROUT INJECT PU1 (5.5KG)

Name: MYK ARMGROUT INJECT PU1 (5.5KG)
Brand: CIVILIZE MART
Price: 4100.0 INR
Availability: InStock

Price 4100.0 INR/ Kilograms

Get a Price/Quote

MOQ : 1 Kilograms

MYK ARMGROUT INJECT PU1 (5.5KG) Specification

Application
Injection into concrete cracks, waterproofing basements, sealing tunnels, foundation repair

Water Content
<1%

Physical Form
Liquid (two-component system)

Purity
>95%

Chemical Name
Polyurethane based grouting resin

Feature
Single component, low viscosity, rapid reaction with water, expansive, penetrates fine cracks

Grade
Industrial

Poisonous
Non-poisonous with standard precautions

Other Names
PU Injection Grout, Polyurethane Grout

Usage
Structural crack injection and waterproofing works

Smell
Characteristic, faint odor

Color
Brownish-yellow

Type
Polyurethane Injection Grout

HS Code
39095000

Ph Level
7-8 (Neutral)

Appearance
Brownish-yellow viscous liquid

Storage Conditions
Store in cool, dry place, away from direct sunlight

Density
Approx. 1.12 g/cm3

Tack-Free Time
Approx. 5 minutes (application dependent)

Solubility
Insoluble in water once cured

Pot Life
30 minutes at 25C

Toxicity
Not classified as hazardous under normal handling

Shelf Life
12 months if unopened and stored properly

Adhesion
Excellent adhesion to wet and dry concrete substrates

Mixing Ratio
Supplied ready to use (no mixing required)

Compressive Strength
> 2 N/mm2 after 24 hours

Expansion Ratio
Up to 40 times original liquid volume upon contact with water

Reaction Time with Water
15-60 seconds (depending on application and temperature)

Packaging Size
5.5 kg set

MYK ARMGROUT INJECT PU1 (5.5KG) Trade Information

Minimum Order Quantity
1 Kilograms

Delivery Time
1 Days

About MYK ARMGROUT INJECT PU1 (5.5KG)

91 000 74051 ArmGrout Inject PU1 resin is a solvent free polyurethane injection material which is used in conjunction with ArmGrout InjectPU1 catalyst. ArmGrout Inject PU1 foams with water contact by high increase in volume and becomes firm visco elastic foam,which seals temporarily against further water penetration. ArmGrout Inject PU1 is resistant against acids and lyes and attacksneither bitumen nor joint tapes. In case of very dry surfaces the material does not foam immediately but it hardens slowly dueto the steady addition of existing air resp. soil moisture.

Fast and Effective Crack Sealing

MYK ARMGROUT INJECT PU1 leverages a rapid reaction time with water, expanding significantly to seal even the smallest cracks in concrete. Its tack-free time of approximately 5 minutes allows quick completion of injection projects, making it suitable for emergency repairs and high-traffic areas where downtime must be minimized.

Ready-to-Use and Hassle-Free Application

This grout arrives as a brownish-yellow, viscous liquid that requires no pre-mixing. Simply inject it directly into target areas for efficient waterproofing and structural rehabilitation. Its low viscosity allows deep penetration into fine cracks, ensuring comprehensive coverage and strong, durable repair for critical infrastructure.

Reliable and Safe Solution for Structural Repairs

MYK ARMGROUT INJECT PU1 is designed for both industrial and structural use, featuring excellent adhesion, rapid expansion, and non-toxicity under standard handling. With a shelf life of 12 months when stored in cool, dry conditions, it remains a reliable choice for distributors and contractors engaged in foundation, basement, and tunnel repairs across India.

FAQ's of MYK ARMGROUT INJECT PU1 (5.5KG):

Q: How do I apply MYK ARMGROUT INJECT PU1 for concrete crack injection?

A: MYK ARMGROUT INJECT PU1 is supplied ready to use. Simply inject the liquid directly into cracks or voids using suitable injection equipment. Upon contact with water, it rapidly expands, sealing voids or cracks effectively.

Q: What is the benefit of using a single component polyurethane grout like this product?

A: A single-component system eliminates the need for on-site mixing, reducing preparation time and minimizing human error. This convenience, combined with its rapid reaction and high expansion rate, enables efficient structural repairs and waterproofing.

Q: When can the repaired surface be put back into use after injection?

A: Typically, MYK ARMGROUT INJECT PU1 achieves tack-free status in around 5 minutes, and reaches its full compressive strength in 24 hours. Normal operations can usually resume shortly after application, making it ideal for projects requiring quick turnaround.

Q: Where is this product best used?

A: This grout is suitable for injection into concrete cracks, waterproofing of basements, tunnel and foundation repairs, and other structural applications requiring penetration of fine cracks and effective water sealing.

Q: What is the process behind the rapid expansion in MYK ARMGROUT INJECT PU1?

A: Upon contact with water, the polyurethane resin reacts and expands up to 40 times its original liquid volume within 15-60 seconds. This expansion fills cavities and cracks, ensuring comprehensive sealing and protection.

Q: Is the product hazardous or poisonous during use?

A: MYK ARMGROUT INJECT PU1 is not classified as hazardous or poisonous when standard safety precautions are followed. It has a faint odor and is safe to handle under normal conditions.

Tell us about your requirement