Call:
Send Inquiry
Send InquiryMYK ARMENT AQUA ARM SPU SPL(GREEN)
Price 5896.0 INR/ Number
MOQ : 1 Number
MYK ARMENT AQUA ARM SPU SPL(GREEN) Trade Information
- Minimum Order Quantity
- 1 Number
- Delivery Time
- 1 Days
About MYK ARMENT AQUA ARM SPU SPL(GREEN)
91 000 74051 AquaArm SPU SPL A single-component, high-performance, bitumen-free, polyurethane waterproofing coating. It is moisture-cured, meaning it reacts with humidity in the air to form a highly elastic, seamless, and durable membrane.
Primary Function: To provide a robust, flexible, and chemical-resistant waterproofing barrier for critical areas, both above and below ground, where a high-quality, non-bituminous solution is required.
Key Features & Benefits (from TDS):
Bitumen-Free & High Performance: Offers superior elasticity and longevity compared to many modified-bitumen products.
High Elasticity: Exceptional elongation (500%) to bridge dynamic cracks (2mm).
Excellent Adhesion: Strong peel adhesion to concrete (2.0 N/mm).
Durable: Resistant to hydrostatic pressure, punctures, tears, and chemical ingress.
Environmentally-Friendly: Non-toxic once cured.
Single Component: Ready to use; no on-site mixing required, ensuring consistent quality.
Q1: How is this different from other waterproofing coatings?
A: Its key differentiator is that it is a high-performance, bitumen-free polyurethane. This gives it better elasticity, durability, and environmental credentials compared to bitumen-based or acrylic coatings. It is also single-component, unlike 2-part PU systems.
Q2: What is the application process?
A:
Surface Prep: Concrete must be strong, smooth, clean, and dry (moisture <5%). All corners must be rounded (50mm internal, 10mm external).
Priming: It is mandatory to apply FloArm Primer PUDC on the prepared surface.
Application: Apply the first coat of SPU SPL. Apply the second coat after approx. 12 hours (at 28C) in a direction perpendicular to the first.
Protection: The membrane must be protected with a screed or suitable covering.
Q3: What is the coverage area?
A: The theoretical consumption is ~1.5 kg per square meter to achieve a 1mm Dry Film Thickness (DFT). Actual consumption will depend on surface porosity and roughness.
Q4: How long does it take to dry and cure?
A:
Surface Dry: 12 hours
Fully Dry: 24 hours
Recoat Time: ~12 hours (at 28C)
Water Test: Can be performed only after the membrane is fully cured.
Q5: What is the shelf life and how should it be stored?
A: The shelf life is 6 months from the date of manufacture. It has very specific storage requirements:
Store in a cool, dry, moisture-free, shaded place.
Transport and store the pails upside down (inverted position) to prevent skin formation.
Once opened, the material must be used within 30 minutes.
Q6: What are the critical limitations?
A:
Not root resistant.
Do not apply on damp surfaces or if temperatures are below 5C.
Avoid application in rain, snow, or sandstorms.
The opened pack has a very short application life of 3 hours if resealed.
Protect the applied membrane from direct sunlight during peak summer heat.
Q7: Is it safe to use?
A: Standard chemical safety precautions are necessary:
The storage and work area must be well-ventilated.
Operators must wear a safety helmet, gloves, and protective shoes.
Avoid contact with eyes and skin.
Keep aay from fire and ignition sources.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in MYK Arment Category
Contact Details
CIVILIZE MART
GST : 36AARFC5784E1Z1
- D.No. 12-19, P And T Colony, Medipally, Hyderabad - 500039, Telangana, India
Send Inquiry
Developed and Managed by Infocom Network Private Limited.
