About DR.FIXIT PIDIGROUT 10 M
91 000 74051 Dr. Fixit Pidigrout 10M - High-Strength, Non-Shrink Grout is a ready-to-use, free-flowing cementitious grout that provides very high strength and does not shrink after setting. It is specially designed for heavy-duty applications where a strong, stable, and reliable foundation is critical, such as under heavy machinery, bridge bearings, and structural columns.
Key Benefits:
High Strength: Achieves compressive strength of over 800 ksc (approx. 80 MPa) in 28 days.
Non-Shrink: Expands slightly upon setting to ensure a perfect, full-contact bond with the base.
Free-Flowing: Easily flows into tight spaces and under base plates without needing vibration.
Ready-to-Use: Just add water and mix for easy application.
Heavy-Duty: Ideal for machinery foundations, precast structures, and turbine bases.
Approximate Market Price: 399 - 499 per 25 kg bag (Please contact for the best bulk price!)
Questions and Answers:
Q1: What is Pidigrout 10M used for?
A: It is used for grouting applications that require high strength and stability. Common uses include fixing heavy machinery bases, bridge bearing pads, boiler foundations, turbine generator plates, and structural columns.
Q2: How much water should be added to a 25kg bag?
A: For a free-flowing consistency, add 4.0 to 4.5 liters of clean water per 25kg bag. For a drier, trowelable mix, use 3.25 to 3.5 liters of water. Never add extra water.
Q3: What is the coverage or yield from one bag?
A: One 25kg bag mixed with water yields approximately 12.5 liters of grout.
Q4: What is the approximate price?
A: The approximate price for a 25kg bag is 499 TO 518. Contact CIVILIZEMART us for a precise quote, especially for bulk orders.
Q5: How strong is this grout?
A: It is very high-strength. It achieves over 350 ksc in 24 hours and reaches a final compressive strength of over 800 ksc (80 MPa) in 28 days.
Q6: Does it shrink or expand?
A: It is a non-shrink grout. It undergoes a slight controlled expansion during setting to compensate for any shrinkage, ensuring a tight, void-free fill under the base plate.
Q7: What is the shelf life?
A: When stored in a sealed container in a shaded area, it has a shelf life of up to 1 year.
Q8: Can it be used for deep fills?
A: Yes, for fills deeper than 75mm, you can add approximately 10 kg of clean, washed 10mm crushed aggregates to each 25kg bag of grout to reduce heat generation and cost.
Q9: What precautions should be taken during application?
A:
Soak the base surface with water for 24 hours before grouting.
Ensure the shuttering (formwork) is completely leak-proof.
Do not add extra water to the mix.
Cure the grout after placement by covering it with wet jute bags or using a curing compound.