CICO TAPECRETE P-151 POLYMER WATERPROOFING ADMIXTURE

About CICO TAPECRETE P-151 POLYMER WATERPROOFING ADMIXTURE

91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5C to 30C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm (or concrete failure, meaning the concrete itself fails before the bond does).

Reliable Waterproofing for Construction Needs

CICO TAPECRETE P-151 provides lasting waterproofing solutions for concrete and masonry structures. Its advanced acrylic polymer technology ensures enhanced adhesion and significant reduction in surface permeability. Specially formulated for applications like repair mortars, screeds, and cementitious coatings, it helps protect structural durability in varied climatic conditions. The product's versatility and performance make it a preferred choice among distributors and service providers in India.


Enhancing Structural Durability

By integrating CICO TAPECRETE P-151 into construction mixes, users benefit from improved mechanical properties and resilience. The admixture not only fortifies the bond between old and new surfaces but also increases the lifespan of structures exposed to moisture. Its ability to form a sturdy, water-resistant barrier proves essential in high-performance concrete and masonry work.