CERAMIC TILE ADHESIVE

About CERAMIC TILE ADHESIVE

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive  just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

Key Features & Benefits

• Easy to use  just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion  meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency  because its single-component and just water-mixed, its cost-effective and easy for tilers to handle. 

• Works on a variety of substrates  concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

Typical Applications

• Interior floor and wall tiling in homes, apartments, offices  kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

Product & Packaging Info

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 5560 sq.ft per 20 kg bag when applied with 6 mm 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

Superior Bond Strength and Coverage

Formulated for industrial use, our ceramic tile adhesive boasts a compressive strength exceeding 6 N/mm2 and a minimum tensile strength of 1.0 N/mm2 (as per ISO 13007). Strong initial grab and a glue thickness of 3-5 mm make every application robust and lasting. With a coverage of 3-4 m2 per 20 kg (depending on trowel size and substrate), it maximizes efficiency on every job site.


Simple Mixing and Application Process

Mix approximately 4.5-5 litres of water with each 20 kg bag to achieve the ideal consistency. The adhesive's workable pot life is about 2 hours at 27C, and open time extends up to 30 minutes, providing flexibility during installation. Its ready-to-use powder form is easy to handle, ensuring smooth and even application on concrete, render, cement board, and plaster.


Suitable for Diverse Environments

Engineered for both interior and exterior projects, this adhesive is water-resistant and non-shrink, ensuring durability in various climates. Its non-toxic formulation and high purity level (99%) make it safe for use in a wide range of settings, from residences and commercial spaces to industrial environments.