ASIANPAINTS SMARTCARE FLEXI SEAL PU(25 KG)

Price 7800.0 INR/ Kilograms

Get a Price/Quote

MOQ : 1 Kilograms

ASIANPAINTS SMARTCARE FLEXI SEAL PU(25 KG) Trade Information

Minimum Order Quantity
1 Kilograms

Delivery Time
1 Days

About ASIANPAINTS SMARTCARE FLEXI SEAL PU(25 KG)

91 000 74051 SmartCare Flexiseal PU A single-component, pitch-modified, polyurethane liquid waterproofing membrane. It is cold-applied and cures by reacting with moisture in the air to form a seamless, highly elastic, and durable waterproofing layer.

Primary Function: To provide a high-performance, flexible barrier that protects structures from water ingress, both above and below ground. It is designed to bridge cracks and accommodate structural movement.

Key Features & Benefits:

High Elasticity: Exceptional elongation (600-900%) to bridge cracks and handle movement.

Seamless Membrane: Forms a continuous, joint-free layer.

High Solid Content (86%): Provides a thick film build-up in a single coat.

Excellent Adhesion: Bonds to a wide range of substrates (concrete, masonry, brick, etc.).

Chemical & Thermal Resistant: Stable in aggressive conditions and from -40C to +70C.

Root Resistance: Suitable for planter boxes and green roofs.

Easy Application: Can be applied by brush, roller, or airless spray.

Q1: How is this product applied?

Surface Prep: The concrete must be sound, level, and clean (free of dust, oil). Moisture must be <5%. Repair all holes and cracks.

Priming: Priming is generally not needed on sound surfaces. For porous or very smooth surfaces, a primer coat (Flexiseal PU diluted 40% with Solvalux thinner) is recommended.

Crack Treatment: Seal large cracks and joints with SmartCare Unoverseal PU Sealant and reinforce with a fiber mesh strip embedded in Flexiseal PU.

Application: Apply to achieve a Dry Film Thickness (DFT) of 1mm to 2mm. This can be done in one or two coats. On vertical surfaces, apply a maximum of 0.5mm per coat.

Curing: Allow it to fully cure for 7 days before subjecting it to water.

Q2: What is the coverage area?

A: 1 liter covers 1 square meter at a 1mm DFT on a smooth surface. Rough or textured surfaces will require more product.

Q3: How long does it take to dry and cure?

Touch Dry: 15 - 24 hours (at 25C, 50% RH)

Full Cure: 7 days (to achieve full properties)

Flood Test: Can be conducted after 7 days of application.

Q4: Does it require a protective layer?

A: Yes, absolutely. The membrane must be protected from exposure and mechanical damage.

Horizontal surfaces: Protect with a 250 GSM geotextile separation layer and a concrete screed (M20 grade).

Vertical surfaces: Protect with plaster, screed, or a protection board before backfilling.

It should never be left exposed to the open sky.