Adhesive Floor Tiles

About Adhesive Floor Tiles

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive  just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use  just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion  meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency  because its single-component and just water-mixed, its cost-effective and easy for tilers to handle. 

• Works on a variety of substrates  concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices  kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 5560 sq.ft per 20 kg bag when applied with 6 mm 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)